.

  Treat yourself to a nice EPP Aerobat .

We have fantastic collection of  EPP  models with a choice of over 70+ designs . You can choose from a range of sizes from about 800mm which is a nice compact size you could fly in a large garden . The next group are model of about 1m which make the best all
rounders . If big is your preference we have EPP models up to 1.5m

This summer we have a promotional offer of the best of these , the classic Czech made 3d models .
We have on offer the complete setup to suit all tastes and budgets. You can customize the package with the drop down menus .

 Contrary to popular belief that foamies are not good on windy days with the right setup
a model like Sniper 2 X can fly as well or better than a classic I/C  funfly  like Limbo Dancer , Magic ,Cougar etc and the low speed handling is considerably better. The other benefit is that these models are safer , cleaner and will not end up as balsa confetti on your first dumb thumb incident.

We have listed below the many types of EPP models that we stock grouped in styles and construction. The models design determine how the model will fly and feel,  as well as the suitability for you and the flying conditions.

 
********************************************************************
EPP Profile 800mm - Flat Section wings and Power Pack A1 -CLICK HERE for selection 
Blade EPP 3dRC-FACTORY CRACK YAK GOLDRC-FACTORY EDGE 540 EPP HOTBLUERC-FACTORY SBACH EPP (80CM) GREEN
 
The above group is the smallest practical  size for flying outdoors in low wind .
 
The models is this group are profile EPP with flat wing sections and come in a variety of shapes and colors. These are very easy to build and have a small part count. The great advantage of models in this group is that the light weight and size allows you to fly in a garden or small area. The models  in this group are also suitable for indoor flying .
 
 
The  typical example of this group, also the longest established is the Blade EPP.  It can be completed at low cost offers great performance . Over the years there have been many offerings of this type of model the latest range consist of the models by RcFactory choice of designs and colors with flying weights of 180-220gms
 
The power requirements for these are very basic and the total cost of the model and all airborne equipment to get in the air can be from as low as £70 + Rx. and you will have the best value for money flying . The model are for about 60-80watt power , 2cell 400-800 lipo
***************************************************
 
The 800mm section wings EPP Aerobats and PowerPack A2 CLICK HERE for Selection.

BOOM-AIRBRUSHSukhoi SU-29 - EPP Profile 3DUNIQUE-GREEN AND BLACK CMS COMPOSIT BLADE DANCER AIRBRUSH

This is the smallest practical size for outdoor flying in a bit of a wind. Although still profile they differ from the above group by having semtrical wing sections. The models therefore fly level as opposed to incidence flying.  The models in this group are designed for 100-140watt on 3cell 700-1000mah lipo . The compact size is ideal as a second model to have in your car as a backup to you large plane or heli.  There is a choice from Telink , Mscomposite and Freeair with all up weights of around 280-400gms

***********************************************************************
 
EPP Profile Aerobats 1000m and PowerPacks A3- CLICK HERE for Selection 
 
The model in this group are the most popular and the best all rounders. The size and power combinations as well as the wing loading give you the best characteristics . These models can fly just about any manouver and the are perfect to learn 3d. We can confidently state that many  3d champs would have been created by sharpening their skills on one of these. As this is our best selling group we have a huge choice of styles and equipment to suit. The model are about 450-650gms in weight , need about 150-220watts and 850-1300 mah 3cell.


RC-FACTORY FLASH EPP KIT DRC FACTORY RS 352 EPP PLANEBlast - EPP Profile 3DNEW SNIPER II SUPER 3D AEROBAT EPP
------Rc-Factory Flash-------------------Rcfactory Rs352--------------------Freeair Blast--------------Hyperion Snipper-----

YAK 54 - BY RC - FACTORY CZRC-FACTORY YAK 55 * NEW *RC FACTORY SU29 3D AEROBATIC EPP MODELKS DINAMIC SBAKS 20 EPP
------Yak 54 ---------------------------Yak55---------------------SU29--------------------KS Dynamic FLASH---
 
EPP Profile Aerobats Biplanes - 1000mm  Use PowerPack  A2 / A3

TELINK 3D BUSTERULTIMATE SEMI-SCALE EPP PLANEHACKER MODELS - EPP PITTS BIPLANEUZI XL ecoMS-COMPOSITE NICO BIPLANE

EPP Profile Aerobats - 1100-1200mm Use PowerPack A4

TELINK YAK 55 REMOVABLE WINGS DESIGN BY JIRI JAROLIMEK
            JUN BRC FACTORY SU29 1.2 METER WING SPANUNIQUE "L" AEROBATICNEW SNIPER X II SUPER 3D AEROBAT EPP LARGE

EPP  Aerobats with built up fuselage  - 1000-1200mm -Use PowerPack A3 
FREEAIR JAK55 (YAK) BUILT-UP EPP AEROBATICHACKER EXTRA 330SC ARF RED/YELLOWPOTENSKY AKRO ECO EPP MODELHACKER EDGE 540 1200mm
 
 
************************************************************************************
CUSTOM SELECTION MENUS- Click Here
 
HYPERION ZS-2205-34 1587KvROBOTBIRDS PRO-30A V4 ESCHYPERION G3 CX-25C 0450-2CELL LIPOHYPERION - DIGITAL SERVO DS20FMDControl Links - 1.5mm 10 packAPC 10x3.8 SlowFlyGlues

 On the power packs there are drop down menus so you can alter some items to suit . The price of the pack is for standard version and selecting alternatives the system adds or subtracts the final total .

Choice of Motors
The motor choice is standard power for the model and upgrades are offerd on the selection menu . Please note
that in some cases the motors are front or rear mounted and a small alteration may be necessary. The motors include prop and motor mount. 

+ Esc

The RB Pro is the best choice for the 1m size and its not worth saving a few pence for a low cost esc. A program card is available but not necessary as you can program from stick.

+ 4 servos
You can select the type of servos. The std servos are metal geared servos as it is likely that these model will be flown
hard. You can select plastic geared servos at a reduction in price or select higher end digital servos.
 
+ Prop

A prop is included and you can select additional 2packas spare  in the selection menu.

+ lipo

A suitable lipo is included and you can choose an additional 2 . You can also upgrade to higher end fast charge cells in the
selection menu.
 
+ Acessories upgrade.

The package include motor and prop mount. You can select optional pack to include spinner, connectors for motor and esc. Also included are better clevisis and extra carbon is handy for control linkage and reinforcement.
 
+Glue pack

You can use most glues for wirecut EPP as unlike foam it does not disolve with Cyano. Its possible to make the model with cyano only but better is a commination of glues. We have found the best is to use UHU Por or similar for the EPP parts and the hardware can be fixed with either Cyano+activator or 5 Epoxy which is messy but makes a better join. The models require carbon to be imbeded in the EPP. The best way is to have thin 1.5mm rods in parellel either side of the surface. A scalpel cut(not grove) is drawn and rods pushed in the cut can be filled with SpeedBond which dries clear and not mess up the paintwork. Also this type of glue be used to fill all cornices, a bit like bathroom silicon sealent and once set makes a very strong model. The glue pack includes UhuPor, Epoxy and Speedbond. 

 . We would gladly offer deals for group / club purchases of 3 to 5 models on some of the models on the list .
We shall have regular promotions from time to time - look out for the "PROMO" link on our main page or our occasional emails.